So, I made jerky this weekend using the Alton Brown recipe. It came out quite yummy, and was a fun little project. Next time I want to try for a teriyaki flavoring.

Some lessons:
You really want lean cuts. I wasn't able to find flank steak, so I used some promising looking sirloin. It came out just fine, but if forced to again I'd trim the fat beforehand much more aggressively. It ends up pretty nasty if you don't, and you'll waste less meat if you trim it before drying.
A little desk fan really isn't big enough. It took at least 24 hours to really dry, and I left it going for another 10 just to be sure. Next time I'll use fewer filters and pack the meat tighter.
Fiberglass filters worked just fine, but I did have to be careful to remove some wayward fibers that stuck to the drying meat. Possibly this could be prevented through better surface drying before placing the marinated meat on the filters, but I ran out of paper towels.
Some lessons:
You really want lean cuts. I wasn't able to find flank steak, so I used some promising looking sirloin. It came out just fine, but if forced to again I'd trim the fat beforehand much more aggressively. It ends up pretty nasty if you don't, and you'll waste less meat if you trim it before drying.
A little desk fan really isn't big enough. It took at least 24 hours to really dry, and I left it going for another 10 just to be sure. Next time I'll use fewer filters and pack the meat tighter.
Fiberglass filters worked just fine, but I did have to be careful to remove some wayward fibers that stuck to the drying meat. Possibly this could be prevented through better surface drying before placing the marinated meat on the filters, but I ran out of paper towels.
no subject
(And I know some people are going 'eep! making jerky for a DOG??!?' but given a) the cost of medical treatment should they get cancer or otherwise ill from the god-knows-what and b) the relatively small amount they'd get each time as a treat, I'm thinking it's worth it.)
Also, you might want to try putting some cheesecloth over the filters next time. It shouldn't significantly interfere with the drying process, but should provide protection against most wayward fibers.
no subject
no subject
no subject
no subject
(no subject)
(no subject)
BTW...
Re: BTW...